Flyingbear торнадо 2 большой 3d принтер DIY металлический линейный рельс 3d принтер комплект высокого качества прецизионный двойной экструдер




Flyingbear торнадо 2 большой 3d принтер DIY металлический линейный рельс 3d принтер комплект высокого качества прецизионный двойной экструдер

Flyingbear торнадо 2 большой 3d принтер DIY металлический линейный рельс 3d принтер комплект высокого качества прецизионный двойной экструдер

РАСПРОДАЖА

Сохранить US$323.75

Объем Розничные продажи37Рейтинг продукта4.8
Изначальная ценаUS $875.00скидка 37%
Последняя цена:US $551.25
   Подробнее Подробнее   





Flyingbear Tornado 2  large 3d Printer DIY Full metal Linear rail 3d printer Kit High Quality Precision double extruder


Flyingbear Tornado 2  large 3d Printer DIY Full metal Linear rail 3d printer Kit High Quality Precision double extruder


Flyingbear Tornado 2  large 3d Printer DIY Full metal Linear rail 3d printer Kit High Quality Precision double extruder


Flyingbear Tornado 2  large 3d Printer DIY Full metal Linear rail 3d printer Kit High Quality Precision double extruder


Flyingbear Tornado 2  large 3d Printer DIY Full metal Linear rail 3d printer Kit High Quality Precision double extruder


Flyingbear Tornado 2  large 3d Printer DIY Full metal Linear rail 3d printer Kit High Quality Precision double extruder


Dear customers,
 
As Chinese traditional festival "Spring Festival" approaches, all staff of FLYINGBEAR wish you a happy holiday. And thank you very much for your support to FLYINGBEAR this year.
 
1. Our company\'s vacation time is 2019.01.28 to 2019.02.22, we will get back at 2019.02.22.
 
2.  In the meantime,  overseas warehouses can arrange shipments normally.Orders from other countries will be shipped asap after we get back to work.
 
3. Online consultation and after-sales service will be delayed, you can also ask for help in our Facebook group. 
 
 
 
We apologize for the inconvenience that may caused and thank you for your cooperation.
 
Thanks again for your attention and support.
 
 
 
Best regards
 
FLYING BEAR 3D PRINTER

New Vresion Tornndo-2 Linear Guide Rail FlyingBear 3D Printer

Machine features

  • Printer adds a filament runout sensor function, printing process don’t need to worry about filament exhausted and print failure.
  • The motor adopts TMC2208 driver,quiet operation, stable, high print quality.

  • The Y-axis uses  dual motor for more powerful power and long-term printing without losing steps.

  • Each part is made of metal! the structure and the extruder are all-metal!

  • Using linear guide rail as motion mechanism, so it runs smoothly and the noise almost can not be heard.

  • Sheet metal housings are provided with a variety of mounting holes that allow you to modify the printer.

  • With the rare 10mm wide synchronous belt, the printing accuracy is higher

  • Hot bed supported by double Z axis design, so in the process of printing, the hot bed more will be smooth and steady.

  • 600w Power Supply, hot bed can be heated to 120 ° C

  • Printers don\'t have WiFi functions, so you need to buy WiFi modules.

Model introduction

  • Single extruder:The printer has 1 extruder and uses LCD12864 controls

  • Dual extruder:The printer has 2 extruders and uses LCD12864 controls

  • Single Auto leveling:The printer has 1 extruder, with automatic leveling and LCD12864 controls

  • Dual Auto leveling:The printer has 2 extruders, with automatic leveling and LCD12864 controls

  • Single-E Touch:The printer has 1 extruder and uses touch screen controls

  • Dual-E-Touch:The printer has 2 extruders and uses 4.3 inch touch screen controls

  • Single-E-A-Touch:The printer has 1 extruder, with automatic leveling and touch screen controls

  • Dual-E-A-Touch:The printer has 2 extruders, with automatic leveling and touch screen controls

Machine parameters

  • Name :Flyingbear - Tornado 2  

  • Print size:360*360*360mm

  • Printer size:583*533*500mm

  • Layer thickness precision: 0.05-0.3

  • MAX printing speed: 150 mm/s.

  • Material type: PLA, ABS, PETG, Wood, PVA, 

  • Material specifications :1.75mm in diameter.

  • Positioning accuracy: Z 0.002mm, XY 0.01mm.

  • Nozzle diameter: 0.4mm (customized 0.2mm/0.3mm)

  • Recommended extruder temperature: 210°C (the maximum 240°C).

  • Hot bed temperature: 60-120°C .

  • Extruder number: 1/2.

  • Power requirements: 110V/220V, 600W

  • Connection: SD card or USB.

  • The file print format: STL,G-Code.

  • Compatibility: Windows, Mac. 

  • Control software: Repetier-host,Cura. 

  • Machine weight: 22k

NOTICE

  • some countries need to provide tax code, especially in Brazil and Argentina, so after you pay, please tell us your tax code.
  • please make sure that your shipping address is correct, if you provide the wrong address, make the package returned, you will need to pay the shipping charges.
  • some countries think that the 3D printer can print weapon, so please do not tell the customs clerk, you can say that the printer is used to print parts      
  • free shipping is not included the import duties of your country