1 шт. автомобиль мотоцикл тормоз Гидравлический насос масляный Bleeder сцепления опорожнения жидкости теплообменник Прямая доставка
|Объем Розничные продажи||3||Рейтинг продукта||5.0|
|Изначальная цена||US $15.77||скидка||17%|
|Последняя цена||:||US $13.09|
- People in the Garage all know that, it will need generally two people to cooperate for replacing brake fluid/clutch oil/Mian pump or sub pump.If two people did not coordinate well, one on car step until the foot is tired while one off the car get dirty oil stained on the floor. But this tool solves this problem perfectly!
- Easily operate, Only one person can finish brake fluid replacing work;
- Without dirty oil stained on the floor.
- Abandoning traditional tiring and boring oil replacing method.
- Universally works for cars, trucks and engineering vehicle.
- Fast replace oil/empty air, simple work
- Effectively repair car, earn money faster
How to use:
- 1. Firstly take away the dirty brake fluid from the tank;
- 2. Put in the new fluid back;
- 3. Start the car and connect emptying hose, back-out emptying screw for half circle
- Open the tool valve, begin to pump. Take it easy if there is less quantity of air slide into our tool. When the liquid rises up to 3cm, tightening the screw. And then please turn off our tool valve
- 4. Emptying screws of some cars are very loose, which will result in heavy air leakage and no oil will be pumped out. For that situation, we need to disassemble the emptying screws completely, and use the cone shape connector to pump. But please remember that our bottle should be lifted higher than the braking branch pump to ensure it work properly
- Material: Plastic+Metal
- Pump Size: 20x5cm
- Hose Length: 80cm
- Quantity: 1 Set
- Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
- Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
- 1 Set x Brake Fluid Replacement Tool